Satons
Home > Product center > Single-phase transformer
Single-phase transformer
Single-phase transformerDG Serise
Product introduction
No serious effect of gas steam, transformer insulation transformer installation place gasification precipitation, dust, dirt and other explosive and decadent medium.
Data download
One, product introduction
      DG series single-phase transformers are widely used in 50.60HZ, various input,product output, voltage, connected groups, adjusting the tap position, the distribution of winding capacity, the secondary winding configuration, if required with housing and so on, are meticulous design and manufacturing according to the user's requirements, particularly suitable for use with imported equipmentspecifications 500VA to 320KVA.    
Two, the use of the environment

1 environment temperature: -15 ~ +40 (c)

2 altitude: <2000m

3 relative height: <90%

No serious effect of gas steam, transformer insulation 4 single-phase transformerinstallation place gasification precipitation, dust, dirt and other explosive and decadent medium;

The relative humidity of 5 single-phase transformers atmosphere around the air humidity is not more than 50 ℃ +40 , relative humidity in low humidity can behigh, humidity maximum average wet month was 90%, while the average minimumtemperature for the month of +25% taking into account due to temperaturechanges occur in the solidified product surface;

Special conditions of the 6 that do not meet the above conditions, by using the conception and I companies determine.
Three, the technical parameters

Voltage rating: 1KV

Rated capacity: 5 ~ 320 (KVA)

The connection group: 1iO

Power frequency withstand voltage: 3KV/min

Insulation grade: F/H

Core temperature limits: not more than 85K, the coil temperature does not exceed 95K 

Share to your:

Blog roll

All rights reserved: Satons (Shanghai) power supply co., LTD. | Tel:+86-21-6461 9085/6461 9086 | Web site:www.sadunsi.com | 沪ICP备09099323号-2
Technical support:萨顿斯(上海)电源有限公司 点击这里给我发送消息