Satons
Home > Product center > Input filter
Input filter
Input filterRFI Series
Product introduction
Radio interference input filter can effectively inhibit the audio equipment, close to the frequency converter installation.
Data download
One, product features

Radio interference input filter can effectively inhibit the audio equipment, close to the frequency converter installation;

Installed at the input side converter;

Input filter for wavelength range 100K to 30MHz;

When the noise jamming equipment installed in the inverter near, input filterusing this type of.

Two, the product parameters

Rated voltage: 440/250VAC; 1140/690VAC (can be customized with differentvoltage grades)

Test voltage (1 minutes): line to line 1500VDC line to the 1500VAC/2500VDC

Insulation resistance: line to ground (300A)  1500M

Output impedance: 1 (K Ω

Input impedance: 5 (K Ω

The stopband attenuation (dB): 10

Insertion loss (dB): 35

The reference temperature: -25 ~ 85 (c)

Drive level: 30 (mW)

Load resonant resistance: 35 (Ω

The load capacitance (pF): 60

The total frequency difference: 15 (MHz)

The temperature and frequency difference: 5 (MHz)

Adjust the frequency difference: 60 (MHz)

The nominal frequency (MHz): 50/60

Category: filter

Model No.: RFI-200

Brand:Satons
Share to your:

Blog roll

All rights reserved: Satons (Shanghai) power supply co., LTD. | Tel:+86-21-6461 9085/6461 9086 | Web site:www.sadunsi.com | 沪ICP备09099323号-2
Technical support:萨顿斯(上海)电源有限公司 点击这里给我发送消息